English   

Operation interface of CNC controller systems 150IM-II

  • Autor:karl
  • View:2523
  • Time:2013-05-04 23:09:12

Whole cnc controller systems adopts multi-leveled menu full screen operation, user-friendly interface, providing comprehensive information. It enters into the main interface as followed as booting.

Definition of each display area (fig 3.2) in the cnc systems main screen as below:

1. title bar: the top column shows company’s logo and current time

2. program display area: show the program which will execute or being running “/tmp/NC/”is default path or program and “89” is program name.

3. G code display area: show the G status of current executing program or the coordinate system in non-auto mode. For example: G53 means machine coordinate system.

4. program display area: show the program content which being executed or running and the progress (show through scroll bar)

5. feed speed display area: show the speed, rate, real speed and speed ratio of feed axis. “F5000” in the column means the speed is 5000mm/min; “F0” means real running speed is 0mm/min; percentage means the rate switch gear level is 100%.proportional band shows the proportion between real running speed and the max speed setting in the parameter. The green part means the real running speed is less than 60% of the max running speed, it is safety area; yellow part means the real running speed is 60%-100% of the max speed, it is warning area; red part means the real running speed is more than 100% of the max running speed. It is dangerous area.

6. spindle revolution display area: show speed, rate, real running speed and speed ratio of spindle under present code. “S2000” in the column means the speed is 2000r/min; “S0” followed means the real running speed is 0r/min; percentage means the rate switch gear level is 100%. proportional band shows the proportion between real running speed and the max speed setting in the parameter. the green part means the real running speed is less than 60% of the max running speed, it is safe area; yellow part means the real running speed is 60%-100% of the max speed, it is warning area; red part means the real running speed is higher than 100% of the max running speed. It is dangerous area.

7. manual or auto mode display area: show the display mode in manual or auto and continuous, increment, MPG status etc and relevant information in the manual mode.

8. M code display area: show the validity of M code. Green light means valid and red-light means invalid.

9. tool status display area: show relevant information, as show in fig3.2 from left to right, the first T01 means the current tool number on the spindle; H0 means the current tool edge H (length compensation number); D0 means the current tool edge D (radius compensation number) 01 means current cutter seat number, cutter seat number at tool exchange position; T00 means tool number on the current cutter seat.

10. machine coordinates display area: show the coordinates value of machine coordinates (G53)

11. coordinates display area: dynamic coordinates display, showing present coordinates (machine coordinate system or work coordinate system).the circle behind coordinates sign (X, Y, Z, A)means indicator light, which shows the status of reference returning for each coordinate,  green light means the coordinates has returned machine refer zero, otherwise not. Make sure all zero returning indicator are green during running or before auto running.

NOTE: If servo driver alarm or other phenomenon after zero returning, the green light will go off.

12. machining time display area: show the executed time for present program.

13. workpiece number display area: show the cycle times for present program, quantity of machined

workpieces

14. program block display area: show the exact program block for present program.

15. information display area: show the relevant information of system and machine. such as alarm, soft limit and so on.

16. program running status display area: show the auto running status of the program .such as step, continual, real machining, simulation, stop, run etc.

17. menu display area: used for display function menu. Press corresponding softkey (F) to shift.

System menu structure:

  Whole system adopts multi-leveled menu as followed: