English   
AC Servo Driver(GTAS-50A)

AC Servo Driver(GTAS-50A)

GTAS-50A AC Servo Driver GTAS-50A is our new and successful driver model,Very reliable Servo Driver,which can control servo motor power capacity less than 5.5kw; can not use for CNC field, but also can apply in automation field such as packing machines , printing machines etc.
AC Servo Driver---GTAS-50A Specification:

>used to drive AC servo motor with power capacity less than 5.5kw

>Input power: 3PH AC220V, -15-+10%, 50/60Hz

>Operating temperature: 0-40deg (no freezing), bellow 80%RH (no dewing)

>Storage/delivery temperature/humidity: -40-50deg, bellow 80%RH (no dewing)

>Atmosphere environment: 86-106kPa

>Control mode: 1. Position control

>Control input: 1. Servo ready output 2. Servo alarm output 3. Positioning finish output/speed reach to output

>Position control: Input mode: 1. Pulse + Sign 2. CCW pulse/CW pulse 3.2pH A/B perpendicular pulse

>Electric gear: 1-32767/1-32767

>Feedback pulse: 2500 lines/rpm

>Speed control: 4 kinds of internal speed

>Acceleration function: Parameter setting 1-10000Ms/1000r/min

>Monitor function: Revolution, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running status, input output terminal signal etc.


Model

GTAS-30A

GTAS-50A

Input power

3-phase AC220V -15%--+10% 50/60Hz

Environment

temperature

Work: 0--40° C storage: -40° C--50° C

Humidity

40%--80%(no dewing)

atmospheric pressure

86--106kPa

Control method

Position control

Regenerative brake

Built-in

Characteristic


Characteristics

Speed frequency response

≥ 250Hz

Speed fluctuation rate

< ± 0.03( load 0--100%); < ± 0.02(power supply -15%--+10%)
(numerical value corresponding to rated speed)

Timing ratio

1: 5000

Pulse frequency

≤ 500kHz



Control input

1)Servo enable 2)alarm clearance 3)CCW servo inhibit 4)CW servo inhibit 5)Deviation counter zero/speed selection 1/zero speed clamping 6) instruction pulse inhibit/speed selection 2 7)CCW torque limit 8)CW torque limit

Control output

1) servo ready output 2)servo alarm output 3)positioning completing output/speed in-position output 4)mechanical brake output

Position control

Input method

1)pulse+ sign 2)CCW pulse/CW pulse 3)2-phase A/B orthogonal pulse

Electrical gear

1-32767/1-32767

Feedback pulse

2500line/rev

Speed control

4 kinds of internal speed

Acceleration function

Parameter setting: 1-10000ms / 1000r/min

Monitor function

Speed, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running state, input/output terminal signal and so on.

Protection function

Overspeed, overvoltage/undervoltage of main power supply, overcurrent, overload, brake abnormity, encoder abnormity, control power supply abnormity, position out-of-toleration

Load inertia

Less than 5 times of motor inertia



Feedback
Your Email *
Content *
Product Name:
Your Name *
Company:
Tel Phone:
Msn:
Skype:
 
Feedback
Your Email *
Content *
Product Name:
Your Name *
Company:
TelPhone:
MSN:
Skype: